Window Tint

Cooler, quieter, yours.

We install Rayno Phantom nano-ceramic film only — real heat and infrared rejection, 99% UV block, non-metallic and signal-safe. Every piece is computer-cut on our own machine, so a blade never touches your glass or paint. Backed by a lifetime warranty.

Computer-cut, every time

A blade never touches your car.

Every panel of film is precision-cut on our own computer plotter from your vehicle's exact pattern — never hand-cut on the glass. That means zero chance of a knife nicking your paint, trim, rubber seals or the glass itself.

Choose your shade

See the look before it's on the glass.

35%VLT

The classic factory look

In the bay

Tint going on.

Ceramic film computer-cut, heat-formed to the glass and squeegeed out — installed in our Kenilworth studio.

Computer-cut ceramic film, heat-formed to the glass.
Ceramic only — here's why

We don't do dyed or metallic film. Ceramic is the only tint worth installing.

Heat rejection

Ceramic film rejects a large share of infrared heat, so the cabin stays cooler and the A/C works less.

99% UV block

Blocks the UV that fades interiors and damages skin — protection you get every drive.

Glare control

Cuts harsh sun and headlight glare for a more comfortable, safer view.

Signal-safe

Quality ceramic film is non-metallic, so phone, GPS and radio signals pass through cleanly.

Privacy

Darker shades keep valuables and passengers out of view without going full limo — your call.

No blades on your car

Every piece is computer-cut on our plotter and applied pre-shaped, so a knife never touches your glass, paint or trim.

The Rayno Phantom line

Three levels of nano-ceramic.

Every level blocks 99% of UV and carries a lifetime warranty. They differ in how much heat and infrared they reject — pick your level of comfort.

Nano-ceramic · essential

Phantom S5

Serious ceramic performance at the smartest price. A huge step up from any dyed or carbon film.

Total heat rejection
up to 65%
Infrared rejection
up to 72%
Solar energy rejected
up to 66%
UV block
99%
Warranty
Lifetime
Nano-ceramic · premium

Phantom S7

The balance most drivers choose — noticeably cooler cabin, excellent clarity, everyday value.

Total heat rejection
up to 85%
Infrared rejection
high
Solar energy rejected
high
UV block
99%
Warranty
Lifetime
FlagshipNano-ceramic · elite

Phantom S9

The coolest cabin we can build. Maximum heat and infrared rejection for the harshest sun.

Total heat rejection
up to 95%
Infrared rejection
up to 92%
Solar energy rejected
up to 70%
UV block
99%
Warranty
Lifetime

Performance figures per Rayno Phantom Series published specifications; actual results vary by shade and vehicle.

Legal note

We install to your local law.

Legal visible-light-transmission (VLT) limits vary by state and by window — windshield, front doors, rear doors and rear glass are often treated differently. We'll walk you through what's compliant for your vehicle before anything goes on the glass. Confirm current limits with your local DMV; this page is guidance, not legal advice.

The install.

  1. 01

    Consult & shade

    We confirm a legal, good-looking shade for each window and your goals — heat, privacy or both.

  2. 02

    Prep & clean

    Glass is decontaminated spotless — dust and fibers are the enemy of a flawless install.

  3. 03

    Computer-cut to your car

    Film is precision-cut on our own computer plotter from your vehicle's exact template — a blade never touches your glass or paint — then heat-formed to each window's curve.

  4. 04

    Application

    The pre-cut, pre-shaped film is laid and squeegeed with tucked edges, then checked for any light gaps.

  5. 05

    Cure & care

    A short curing window before rolling windows down, plus care instructions.

Tint questions.

It depends on your state and the specific window. Front doors are usually more restricted than rear glass. We'll confirm compliant options for your vehicle before installing.

Never. Every piece is computer-cut on our own machine from your vehicle's exact pattern, then applied — so a blade never touches your glass, paint, trim or seals.

Not with quality ceramic film — it's non-metallic and signal-safe. Older metallic films could interfere; we don't use those.

Typically a few days while the film cures, though it varies with weather. We'll give you an exact window at pickup.

Yes — ceramic film rejects a significant portion of infrared heat, which is what you actually feel. Darkness alone isn't the same as heat rejection.

Book your tint.

Tell us what you drive and what you're after — we'll build the right package and a clear quote.